General description:
          Organic-silicone pipes made by extrusion (forcing through a die) of silicone rubber compound. The pipes are intended for use as insulating material and have increased insulation class compared to similar products from other polymeric materials.

Conditions of Use:
          Basic requirements for the preparation and installation:
      The pipes are used for the basic and additional insulation of outlet and installation of electrical wiring, including bundles of insulated wire and insulated wires routed separately.
          Pipes operating at DC and AC voltage up to 1000 V with 50 Hz frequency, they are produced in two types:
          – Version I – at voltages up to 660 V;
          – Version II – at up to 1000 V.
          The pipes are non-toxic, resistant to flame propagation, chemically stable, flexible and efficient in the operating temperature range of -60 ° C to + 200 ° C.

Basic regulations of operation of the product:
           Basic insulation completely covers the conductive parts and can withstand the mechanical, electrical, chemical, thermal and other impacts arising during operation.

The service life of the pipes is 8 years in air at 180 ° C.
Rules of deployment of the pipes are in accordance with the EAR (Rules of Use of Electric Appliances).

Pipe TCR 1,0 mm
Pipe TCR of 1.5 mm
Pipe TCR 2.0 mm
Pipe TCR 3.0 mm
Pipe TCR 3.5mm
Pipe TCR 4.0 mm
Pipe TCR of 4.5 mm
Pipe TCR 5.0 mm
Pipe TCR 6.0 mm
Pipe TCR 7.0 mm
Pipe TCR 8.0 mm
Pipe TCR 9.0 mm
Pipe TCR 10.0 mm
Pipe TCR 11.0 mm
Pipe TCR 12.0 mm
Pipe TCR 13.0 mm
Pipe TCR 14.0 mm
Pipe TCR 15.0 mm
Pipe TCR 16.0 mm
Pipe TCR 17.0 mm
Pipe TCR 18.0 mm
Pipe TCR 19.0 mm
Pipe TCR20.0 mm
Pipe TCR 22.0 mm
Pipe TCR 24.0 mm
Pipe TCR 26.0 mm
Pipe TCR 28.0 mm
Pipe TCR 30.0 mm
Pipe TCR 32.0 mm
Pipe TCR 36.0 mm
Pipe TCR 38.0 mm
Pipe TCR 40.0 mm